Read/Write Register Command
The write register command is most sensitive to the duty cycle. Whereas
the read register works in a wide range, except for a one
Write Register Command
The command sequence was:
reset chip -> write register -> read register
Read Register command
The command sequence was:
reset chip -> read register
The analog sections was power so that also the channel and calibration
mask was readout.
The following figures shows two different ranges for the read register
command:
The two curves min-curve and glitch-occurs-curve enclosure
the range where the reading of the register and the two masks is working.
If the duty cycle is between the two curves glitch-occurs and
max the reading of the register is still working fine but the first
bit from the masks is always zero. The following 255 mask bits are ok.
