How to setup LeCroy 9210 clock pulse generator

Basically, all configuration parameters are setup in the test program. The parameters do not change in power-on/off. Thus, this instruction is for emergency

Push a button Display [CHANNEL A]
Set (or check) configuration parameters like below
- Ampl ...... 2.0 V
- Base ....... 0.0 V
- Duty Cy ... 50%
- Delay ..... 0.0ns
- Lead ...... 1.0ns
- Trail ....... 1.0ns
- 2 Pulse ... OFF
- Freq ...... 40MHz
Push a button Display [TRIGGER]
Set (or check) the a configuration parameter like below
- Mode ... Normal
Push a button Display [MORE]
Push [Cal] on the touch screen and push [Execute], then calibrate it.

Last modified: Fri Apr 02 11:01:44 LMT 2004