TMCM test check list

• Set-up test equipment
  • Plug in a MXI cable from PC to VME-MXI interface board.
  • Plug in a main power cable from Agilent E3646 Output 1 to TIB J8
  • Plug in a bias power cable from Keithley 2400 INPUT/OUTPUT to TIB J7
  • Plug in a clock signal cable from LeCroy 9211 output to LAT VME COM DS-226-0 EXT CLK
  • Plug in a trigger signal cable from TIB J13 to Agilent 53131A
  • Plug in dual 50-p flat cables for INPUT/OUTPUT signals from LAT VME COM DS-226-0 IN/OUT to TIB J4
  • Plug in a 50-p flat cable from VME ADC (Systran VMECS5) J19 to TIB J9
  • Connect a GND wire on the metal shield to Agilent E3646 Output 1 -(minus)
  • Power-on the test rack and wait a minute.
• Start-up test program
  • Log on a terminal PC in a user name, 'teledyne' and a password '*****' (ask Roger or Mutsumi).
  • Run 'resman' (the shortcut icon is on the desktop).
  • Run MCM test GUI program C:\TkrProgUcsc\TmcmMain\TmcmTestMain.bat (the a shortcut icon is on the desktop)
• Repeat tests for each MCM
  • Check wrist band
  • Plug in a connector saver to J1
  • Enter S/N and operator name on the GUI entry fields
  • Choose test category (Pre-Encap, Final, or Post-BurnIn), test location (Teledyne, SLAC), board type (short or tall), and GTRC version (basically, 7)
  • Push start button and continue, then start LEFT-mode functionality tests
  • Plug out J1 and plug in J3
  • Push continue button, then start RIGHT-mode functionality tests
  • Plug in J1 again
  • Push continue button, then start functionality tests in 14, 20, 22 MHz, and bias current tests.
  • If there are errors, check what is wrong and make a decision to continue threshold-scan tests or not. The threshold-scan tests take about 15 minutes. If there is no error, the threshold-scan tests begin automatically.
  • After all the tests finish, print out the excel summary sheet and figures of gain and noise profiles in the data directory.
• End process
  • Power-off the test rack.
  • Burn a CD-R(CD-RW) of the test data (C:\TestData) and send it to SLAC