#
#     input file for bipolar transistor testing
#
# ----------------------------------------------
#
# VS1: V_SUB = 0V, VS2 : V_EPI = 5 V
#
# general options
# ===============
#
# output file name
# bipolar: _type_char will be appended: 
# type - NPN/PNP     char -EmitChar/GumPlo
# diode: _D_FOWARD/REVERSE
#
file: Q-170:ProgramC:TransTest:data:chip2:chip2
#
# integration time
#
intTime: m
#
# compliance values in Amps resp. Voltage
#
I_compliance: 400.0e-6
V_compliance: 5.0
#
# ----------------------------------------------------
#                      BIPOLAR
# ----------------------------------------------------
# SMU1: base, SMU2: collector, SMU3: emitter, SMU4: well
# ----------------------------------------------------
# settings for common emitter characteristics
# enter currents in Amps
# use always positive values (V_well excepted )
#
emitter_char:
I_base:      10.0e-9 5.0e-6 0.50e-6
V_emitter:   0.0
V_collector: 0.0 10.0 0.2
V_well:      5.0
# set ranges for display
# currents in Amps
min_x:  0.0
max_x:  10.0
# I_collector display
min_y1: 0.0
max_y1: 0.001
# V_base display
min_y2: 0.0
max_y2: 5.0 
#
# gummel plot
# -----------
forward_gummel:
V_collector: 0.0
V_base:      0.0
V_emitter:   0.3 1.0 0.01
V_well:      5.0
# set ranges for display
# currents in Amps
min_x: 0.3
max_x: 1.0
# I_collector display
min_y1: 0.0
max_y1: 0.001
# I_base display
min_y2: 0.0
max_y2: 0.001
#
# matching
# -----------
matching:
V_collector: 0.0
V_base:      0.0
V_emitter:   0.3 1.0 0.02
V_well:      0.0
# set ranges for display
# currents in Amps
min_x: 0.3
max_x: 1.0
# I_collector display
min_y: 0.0
max_y: 0.001
#
# -----------------------------------------------------
#                   Diode settings
# -----------------------------------------------------
# SMU1: cathode (biased) SMU2: anode
# -----------------------------------------------------
#
diode_forward:
V_bias: 0.0 -0.5 -0.01
min_y: 0
max_y: -0.01
#
diode_reverse:
V_bias: 0.0 20.0 0.4
min_y: 0
max_y: 0.01
#
# ---------------------------------------------------
#                          J-FET
# ---------------------------------------------------
# SMU1: top gate, SMU2: source, SMU3: drain,
# SMU4: bottom gate = top gate
# ---------------------------------------------------
# put in only postive values
#
jfet_char:
V_gate:   0.0
V_source: 0.0
V_drain:  0.0 20.0 0.5
min_x: 2.0
max_x: 20.0
# I_drain display
min_y1: 0.0
max_y1: 0.004
# I_base display
min_y2: 0.0
max_y2: 0.00001
#
# ---------------------------------------------------
#                        Resistor Pair
# ---------------------------------------------------
# SMU1: commom voltage, SMU2: R1 (0 V), SMU3: R2 (0 V)
# display is set according to setting
# ---------------------------------------------------
#
resistor_pair:
V_R: 0.0 5.0 0.1
#
#