Drawings of Test Boards

BTEM and VME-TEM2 drawings

• Tracker Power Connector
• Repeater Board, schematic, top view, part list, test points
• External L1T trigger board
• Kapton cable termination board config.

Converter Boards

• LVDS/CMOS or CMOS/LVDS (spring 2000)
• CMOS to lvds, connect the pattern generator to a hdi or Liz board.

Liz Boards

• Liz Board : for a GTFE64c and a GTRC (1999)
  schematic, top view (correction), part list, bonding diagram
• Liz Board 2 : for a 0.5 um test chip (November 1999)
  Do not use this board. Use Liz Board 3 instead.
  Robert found a problem with Liz Board 2 during his test. Sergei refined the board design (grounding, routing, etc.) and named it Liz Board 3. Liz Board 3 has the same shematic and the same pad locations as Liz Board 2.
• Liz Board 3 : for a 0.5 um test chip version 2 (April 2000)
  schematic, top view, part list, test chip layout, bonding diagram, test result
• Liz Board 4 : for a 0.5 um test chip version 3 (August 2000)
  schematic, top view, part list, test chip layout

Other Test Chips

• GTFE Test Chip "top5" (August 2000)
  chip layout, shift register section
• GTFE Command Decoder Chip (August 2000)
  chip layout, bonding diagram

Send your suggestions or complaints about this page to Wilko Kroeger

Last modified: Fri Jun 1 15:45:26 PDT 2001